Toyota Corolla (E170) 2014–2019 Owners Manual / Vehicle specifications / Specifications / Tire information / Typical DOT and Tire Identification Number (TIN)
Toyota Corolla (E170): Typical DOT and Tire Identification Number (TIN)
1 DOT symbol*
2 Tire Identification Number (TIN)
3 Tire manufacturer’s identification mark
4 Tire size code
5 Manufacturer’s optional tire type code (3 or 4 letters)
6 Manufacturing week
7 Manufacturing year
*: The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
Other materials:
Replacement
1. Disconnect battery negative terminal
2. Remove engine under cover rh
3. Remove starter assy
Disconnect the starter connector.
open the terminal cover.
remove the nut, then disconnect the starter wire.
remove the 2 bolts, then remove the starter.
4. Install starter a ...
Inspection procedure
1 Inspect fuse(stop)
Turn the ignition switch to off.
remove the stop fuse from the instrument panel j/b.
check continuity of the stop fuse.
Ok: continuity
2 Inspect stop lamp switch assy
Disconnect the stop lamp switch assy connector.
check continuity betw ...
Evap monitor (vacuum pressure monitor)
Notice:
a cold soak must be performed prior to conducting the drive pattern to complete
the internal pressure
readiness monitor.
Cold soak preconditions
The monitor will not run unless:
mil is off.
Fuel level is approximately 1/2 to 3/4.
Altitude is 7800 feet (2400 m) or less.
...